Ethanol Fireplaces

Your EcoSmart Fire ethanol fireplace will burn between 8 and 13 hours on a full burner, with the exact duration determined by your flame setting. The range gives you control over the experience.

A lower flame setting extends burn time and creates a subtle, intimate ambience perfect for a long evening. Higher flame settings deliver a more dramatic visual impact and warmth, though they'll reduce runtime. Adjusting the flame via the slide or hinge mechanism changes oxygen supply to the burner, so you get more hours of gentle glow or fewer hours of bold presence, whatever suits the occasion.

You can also extinguish the burner mid-burn if needed. Simply turn it off and allow the burner to cool for 60 minutes before relighting. The vapours need that cooling time.

The burner capacity varies across our range, so compact models sit toward the lower end of the 8–13 hour spectrum while larger burners reach the upper end.

Bioethanol fireplaces are environmentally friendly in ways that go beyond zero emissions. They produce no ash, soot, or residue, leaving nothing to dispose of, and their ventless design eliminates the environmental cost of infrastructure like chimneys, flue systems, or gas plumbing. The fuel comes from renewable agricultural byproducts: sugarcane, corn, grain, and beetroot.

Because combustion releases only the CO2 that the crops absorbed during growth, the fuel cycle is carbon-neutral. When combined with the fireplace's design durability and longevity, a bioethanol fireplace becomes a low-impact choice for years of use. EcoSmart Fire products meet international safety standards (UL 1370-16, EN 16647) and carry sustainability certifications across manufacturing, reinforcing the brand's commitment to responsible production.

EcoSmart Fire bioethanol fireplaces run on e-NRG fuel, available here .
⁠The actual cost per hour depends on your burner size and flame adjustment.

Consumption ranges from 0.31 litres per hour on compact burners to 1.1 litres per hour on larger models. Using a mid-size burner at full flame, an evening's three to four hours of operation costs approximately USD $10-15. If you adjust the flame to lower settings, consumption drops by 30-50%, extending burn time and reducing fuel costs proportionally. A 5-litre fill typically provides 7–14 hours of burn time, depending on your flame setting and burner size.

The appeal of bioethanol is predictable operational cost with no installation complexity. You’re not financing chimney construction, gas plumbing, or annual servicing. You’re buying fuel when you want to use the fireplace. Bioethanol’s 90-95% thermal efficiency means more of the fuel’s energy becomes usable heat, rather than escaping up a flue. Your actual running cost sits well below traditional fireplaces when you factor in the installation and maintenance savings.

For cost-conscious buyers, adjustable flame control is a practical tool. Lowering the flame doesn’t diminish the visual impact significantly, but it can cut your fuel consumption and cost by nearly half.

Ventless bioethanol fireplaces deliver room-vented performance without any of the infrastructure traditional installations require. There is no chimney, flue, or gas line, and combustion is clean, producing no smoke, soot, or ash. The gains are real: heat stays in the room rather than escaping through a flue, and the fireplace can be positioned almost anywhere, from apartments to open-plan living spaces. Managing the trade-offs is equally clear. Bioethanol combustion consumes oxygen, so the room must meet manufacturer-specified minimum volumes, and ventilation needs to remain adequate during use. These fireplaces are designed for supplemental heating, not as a primary heat source, and they require ongoing refuelling since no fuel line connects them. For spaces where a traditional fireplace is impractical, the room-vented ventless format offers genuine design freedom. The cost of that freedom is active fuel management and attention to room conditions during operation, both of which are clearly outlined in EcoSmart Fire's product documentation and third-party certified safety standards.

Bioethanol fireplaces produce no carbon monoxide during normal operation. Complete combustion converts bioethanol entirely into water vapour and carbon dioxide, and adjustable flame control across EcoSmart Fire's operating range does not alter this chemistry.

Carbon monoxide results from incomplete combustion, when insufficient oxygen prevents full oxidation of the fuel. EcoSmart Fire burners maintain complete combustion across the full output range. The flame arrestor integrated into the burner prevents fuel vapour flashback and sustains consistent burn conditions throughout each session.

Combustion by-products are carbon dioxide and water vapour, the same gases produced by normal breathing and candle combustion. UL 1370 (USA) and EN 16647 (Europe and UK) independently validate that EcoSmart Fire fireplaces meet safety thresholds for unvented indoor use.

Room-vented ethanol fireplace running costs depend on burner size and flame height, since combustion directly controls fuel consumption. Smaller burners consume around 0.31 litres per hour at minimum flame, mid-range around 0.5 L/h, and larger burners up to 1.1 L/h at full flame. At current bioethanol fuel pricing (typically USD $4-6 per litre retail), this translates to roughly $1.24-$6.60 per hour depending on the model and flame setting you choose.

The room-vented design gives you a real cost advantage: because there is no flue, 100 per cent of the combustion heat stays in the room. Every litre of fuel delivers its full thermal output directly into your space, with no heat loss up a chimney. This means lower fuel bills compared to traditional fireplaces at the same comfort level.

To minimise running costs, simply lower the flame height. Flame control is your cost control: it directly reduces consumption. For bulk fuel purchasing (200 litres or more), per-litre pricing drops significantly. Check e-nrg.com for current pricing and bulk rates.

No, never refuel your EcoSmart Fire bioethanol fireplace while it's running or hot. Bioethanol requires careful handling: even if the flame isn't visible, a common occurrence in daylight, the burner remains dangerously hot and volatile vapours persist long after the flame appears extinguished. Contact with any ignition source at this stage can cause serious injury.

Always allow the fireplace to cool completely for at least 60 minutes after shutting off before refuelling. The cool-down is part of the rhythm of responsible ownership. When refuelling, use only the approved Safety Nozzle adapter or Jerry Can with Safety Spout, never pour directly from a bottle over or near the burner. If you spill fuel, remove all ignition sources, open windows and doors for ventilation, wipe the area dry, and wait until it's completely dry before relighting.

UL 1370-certified EcoSmart Fire bioethanol fireplaces are designed for safe indoor use when operated correctly. Pairing the correct cool-down protocol with e-NRG bioethanol fuel ensures consistent performance and safety.

Yes, you can turn off your EcoSmart Fire bioethanol fireplace at any time, even if fuel remains in the burner. Simply close the slider or lift the lid to shut off the flame immediately. The shut-off mechanism is designed for your control, particularly in situations where you need to leave the house, since it's not safe to leave a burning fireplace unattended.

For best results when relighting, wait at least 60 minutes after extinguishing to allow vapours to dissipate. This prevents a strong initial ignition when you restart the flame. If you need to refuel after extinguishing, the burner must be cool to room temperature before adding fresh bioethanol. These waiting periods are simply the correct way to use the fireplace responsibly, ensuring a smooth relight and safe operation.

Ethanol fireplaces typically don't require building permits in most jurisdictions because the ventless design avoids the restrictions that apply to traditional fireplaces. Since there's no chimney, gas line, or flue to regulate, ethanol fireplaces fall outside the strict building codes created for wood and gas systems. EcoSmart Fire products carry UL 1370 and EN 16647 certification, meeting the safety standards most building authorities reference, which often results in automatic exemption from permit requirements.

Where to verify for your location:

• Contact your local building authority directly with your address and installation plan. Most can confirm permit status in one conversation.
• If you're in an apartment, managed community, or strata scheme, notify your body corporate or residents' committee. Whilst permits may not be required, the organisation may want advance notice of the addition.
• Check with your home insurer. Most policies cover ethanol fireplaces without additional riders, but confirming coverage beforehand simplifies the process should a claim arise.

Jurisdictional variation is minimal. With over 150,000 EcoSmart Fire installations across North America, Europe, the UK, and Australia since 2004, the regulatory picture is consistent: ethanol fireplaces gain approval where they're assessed against safety standards rather than traditional fireplace codes. If your jurisdiction does impose conditions, they're typically straightforward ventilation or room-volume requirements, not permit blockers.

Ventless bioethanol fireplaces from EcoSmart Fire are designed as supplemental, not primary, heat sources, delivering 2–4 kW for zone-specific warmth.

An XL900 burner generates 4 kW and heats approximately 60 m² [646 ft²] effectively. EcoSmart Fire's closed-combustion design retains 100% of generated heat within the room, unlike vented gas systems that lose up to 30% through flues, making every kilowatt of output directly useful.

Because combustion draws on room oxygen, adequate room ventilation is required during operation; EcoSmart Fire specifies minimum room volumes for each fireplace to maintain indoor air quality. This design is intentionally optimised for room-scale supplemental heating rather than whole-home continuous output. For whole-home heating, a dedicated primary system remains essential. For creating focal-point warmth in a living room, study, or outdoor entertaining space, EcoSmart Fire fireplaces deliver meaningful, design-forward heat with a fuel consumption rate as low as 0.31 L/h for smaller burners.